HP Cisco MDS 9020 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 257
show interface private-vlan mapping
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Chapter 3 Ethernet Show Commands show interface private-vlan mapping Send comments to [email protected] show interface private-vlan mapping To display information about private VLAN mapping for primary VLAN interfaces, use the show interface private-vlan mapping command. show interface private-vlan mapping Syntax Description This command has no arguments or keywords. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines Before you can configure private VLANs, you must enable them by using the feature private-vlan command. The commands for configuring private VLANs are not visible until you enable private VLANs. This command displays the mapping information between the primary and secondary VLANs that allows both VLANs to share the VLAN interface of the primary VLAN. Examples This example shows how to display information about primary and secondary private VLAN mapping: switch# show interface private-vlan mapping Related Commands Command Description feature private-vlan Enables private VLANs. show interface switchport Displays information about the ports, including those in private VLANs, show vlan Displays summary information for all VLANs. show vlan private-vlan Displays information for all private VLANs on the device. OL-16599-01 Cisco Nexus 5000 Series Command Reference 3-3