HP Cisco MDS 9020 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 261
show ip igmp snooping, explicit-tracking vlan, groups, detail, mrouter, querier
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Chapter 3 Ethernet Show Commands show ip igmp snooping Send comments to [email protected] show ip igmp snooping To display the Internet Group Management Protocol (IGMP) snooping configuration of the switch, use the show ip igmp snooping command. show ip igmp snooping [explicit-tracking vlan vlan-id | groups [detail | vlan vlan-id] | mrouter [vlan vlan-id] | querier [vlan vlan-id] | vlan vlan-id] Syntax Description explicit-tracking vlan vlan-id groups detail mrouter querier (Optional) Displays information about the explicit host-tracking status for IGMPv3 hosts. If you provide this keyword, you must specify a VLAN. (Optional) Specifies a VLAN. Valid values are 1 to 4094. (Optional) Displays information for IGMP group address. (Optional) Displays detailed information for the group. (Optional) Displays information about dynamically detected multicast routers. (Optional) Displays information about the snooping querier if defined. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples This example shows how to display the IGMP snooping configuration of the switch: switch# show ip igmp snooping Related Commands Command ip igmp snooping (EXEC) ip igmp snooping (VLAN) Description Globally enables IGMP snooping. IGMP snooping must be globally enabled in order to be enabled on a VLAN. Enables IGMP snooping on the VLAN interface. OL-16599-01 Cisco Nexus 5000 Series Command Reference 3-7