HP Cisco MDS 9020 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 746
zoneset distribute vsan, show zone status vsan, Cisco Nexus 5000 Series Command Reference, OL-16599-01
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 746 highlights
show zone Chapter 9 Fibre Channel Show Commands Send comments to [email protected] The following example displays zone information for a specific VSAN: switch# show zone vsan 1 The following example displays members of a specific zone: switch# show zone name Zone1 The following example displays all zones to which a member belongs using the FCID: switch# show zone member pwwn 21:00:00:20:37:9c:48:e5 The following example displays the number of control frames exchanged with other switches: switch# show zone statistics The following example displays the status of the configured zones: switch# show zone status The following example checks the status of the zoneset distribute vsan command and displays the default zone attributes of a specific VSAN or all active VSANs: switch# show zone status vsan 1 VSAN:1 default-zone:deny distribute:active only Interop:default mode:basic merge-control:allow session:none hard-zoning:enabled Default zone: qos:low broadcast:disabled ronly:disabled Full Zoning Database : Zonesets:0 Zones:0 Aliases:0 Active Zoning Database : Database Not Available Status: Table 9-3 describes the significant fields shown in the show zone status vsan display. Table 9-3 show zone status Field Descriptions Field Description VSAN: VSAN number displayed. default-zone: Default-zone policy either permit or deny. Default zone: The Default zone field displays the attributes for the specified VSAN. The attributes include: Qos level, broadcast zoning enabled/disabled, and read-only zoning enabled/disabled. distribute: Distribute full-zone set (full) or active-zone set (active only). Interop: Displays interop mode. 100 = default, 1 = standard, 2 and 3 = Non-Cisco vendors. mode: Displays zoning mode either basic or enhanced. merge control: Displays merge policy either allow or restrict. Hard zoning is enabled If hardware resources (TCAM) becomes full, hard zoning is automatically disabled. Full Zoning Database: Displays values of zone database. Active Zoning Database: Displays values of active zone database. Status: Displays status of last zone distribution. 9-52 Cisco Nexus 5000 Series Command Reference OL-16599-01