HP Cisco MDS 9020 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 652
port-track interface
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 652 highlights
port-track interface Chapter 8 Fibre Channel Commands Send comments to [email protected] port-track interface To enable port tracking for specific interfaces, use the port-track interface command. To disable this feature, use the no form of the command. port-track interface {fc slot/port | san-port-channel port} [vsan vsan-id] no port-track interface {fc slot/port | san-port-channel port} [vsan vsan-id] Syntax Description fc slot/port san-port-channel port vsan vsan-id Specifies a Fibre Channel interface. Specifies a SAN port channel interface. The range is 1 to 128. (Optional) Specifies a VSAN ID. The range is 1 to 4093. Command Default None Command Modes Interface configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When the port that an interface is tracking goes down, the interface also goes down. When the tracked port comes back up, the linked interface also comes back up. Use the port-track force-shut command to keep the linked interface down. Examples The following example shows how to enable port tracking for specific interfaces: switch(config)# interface fc 2/3 switch(config-if)# port-track interface san-port-channel 2 Related Commands Command port-track enable port-track force-shut show interface fc show interface san-port-channel Description Enables port tracking. Forcefully shuts an interface for port tracking. Displays configuration and status information for a specified Fibre Channel interface. Displays configuration and status information for a specified SAN port channel interface. 8-118 Cisco Nexus 5000 Series Command Reference OL-16599-01