HP Cisco MDS 9020 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 477
use-vrf
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 477 highlights
Chapter 6 Security Commands Send comments to [email protected] use-vrf use-vrf To specify a virtual routing and forwarding instance (VRF) instance for a RADIUS or TACACS+ server group, use the use-vrf command. To remove the VRF instance, use the no form of this command. use-vrf vrf-name no use-vrf vrf-name Syntax Description vrf-name Specifies VRF instance name. Command Default None Command Modes RADlUS server group configuration TACACS+ server group configuration Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You can configure only one VRF instance for a server group. Use the aaa group server radius command RADIUS server group configuration mode or the aaa group server tacacs+ command to enter TACACS+ server group configuration mode. If the server is not found, use the radius-server host command or tacacs-server host command to configure the server. You must use the feature tacacs+ command before you configure TACACS+. Examples This example shows how to specify a VRF instance for a RADIUS server group: switch(config)# aaa group server radius RadServer switch(config-radius)# use-vrf management This example shows how to specify a VRF instance for a TACACS+ server group: switch(config)# aaa group server tacacs+ TacServer switch(config-tacacs+)# use-vrf management This example shows how to remove the VRF instance from a TACACS+ server group: switch(config)# aaa group server tacacs+ TacServer switch(config-tacacs+)# no use-vrf management OL-16599-01 Cisco Nexus 5000 Series Command Reference 6-143