HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1360

show snmp Chapter 22 Show Commands Send documentation comments to [email protected] show snmp To display SNMP status and setting information, use the show snmp command. show snmp [community | engineID | group | host | sessions | trap | user [user-name] [engineID engine-id]] Syntax Description community engineID group host sessions trap user user-name engineID engine-id Displays SNMP community strings. Displays SNMP engine IDs. Displays SNMP groups. Displays SNMP hosts. Displays SNMP sessions. Displays SNMP traps. Displays SNMPv3 users. Specifies the user name. The maximum is 32. Displays the engine ID. Specifies the engine ID. The maximum is 128. Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) 2.0(x) 3.1(2) Modification This command was introduced. Added the engineid, group, and sessions keywords. Added the trap keyword. Usage Guidelines None. Examples The following example displays SNMP information. switch# show snmp sys contact: sys location: 1631 SNMP packets input 0 Bad SNMP versions 0 Unknown community name 0 Illegal operation for community name supplied 0 Encoding errors 64294 Number of requested variables 1 Number of altered variables 22-328 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x