HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 499

Chapter 8 F Commands fabric-binding enable Send documentation comments to [email protected] fabric-binding enable To enable fabric binding in a VSAN, use the fabric-binding enable command. To disable fabric binding, use the no form of the command. fabric-binding enable no fabric-binding enable Syntax Description This command has no other arguments or keywords. Defaults Disabled Command Modes Configuration mode Command History Release 1.3(1) 3.0(1) Modification This command was introduced. Extended support of fabric binding to Fibre Channel VSANs. Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both both FICON VSANs and Fibre Channel VSANs. The fabric binding feature must be enabled in each switch in the fabric that participate in the fabric binding. Examples The following examples enables fabric binding on that switch. switch# config t switch(config)# fabric-binding enable The following example disables fabric binding on that switch. switch# config t switch(config)# no fabric-binding enable Related Commands Command fabric-binding activate fabric-binding database Description Activates fabric-binding. Configures a fabric-binding database. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 8-9