HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 255

Chapter 4 C Commands clock set Send documentation comments to [email protected] clock set To change the system time on a Cisco MDS 9000 Family switch, use the clock set command in EXEC mode. clock set HH:MM:SS DD Month YYYY Syntax Description HH MM SS DD Month YYYY The two-digit time in hours in military format (15 for 3 p.m.). The two-digit time in minutes (58). The two-digit time in seconds(15). The two-digit date (12). The month in words (August). The four-digit year (2002). Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines Generally, if the system is synchronized by a valid outside timing mechanism, such as an NTP clock source, or if you have a switch with calendar capability, you do not need to set the system clock. Use this command if no other time sources are available. The time specified in this command is relative to the configured time zone. The clock set command changes are saved across system resets. Examples The following example displays the clock set command: switch# clock set 15:58:15 12 August 2002 Mon Aug 12 15:58:00 PDT 2002 OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 4-101