HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 384

debug fcdomain Chapter 6 Debug Commands Send documentation comments to [email protected] debug fcdomain To enable debugging for the fcdomain feature, use the debug fcdomain command in EXEC mode.To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug fcdomain {all | critical | error | fc {pkt | pkthdr} {both | rx | tx} [interface type number [vsan vsan-id] | vsan vsan-id] | ipc {pkt | pkthdr} {both | rx [node range | opcode range | sap range] | tx} | memory | notify | phase} no debug fcdomain {all | critical | error | fc {pkt | pkthdr} {both | rx | tx} [interface type number [vsan vsan-id] | vsan vsan-id] | ipc {pkt | pkthdr} {both | rx [node range | opcode range | sap range] | tx} | memory | notify | phase} Syntax Description all critical error fc fcip port-channel pkt pkthdr both rx interface type number vsan vsan-id tx memory notify phase Enables debugging of all fcdomain parameters. Enables debugging of critical operations. Enables debugging of error operation. Enables debugging of Fibre Channel packets and headers. Enables debugging of Fibre Channel IP packets and headers. Enables debugging of PortChannel packets and headers. Enables debugging of packets. Enables debugging of headers. Enables debugging in both the transmit and receive directions. Enables debugging in the receive direction. Specifies the interface to be debugged. Restricts debugging to the specified VSAN. Enables debugging in the transmit direction, Enables debugging of memory operations. Enables debugging of notifications Enables debugging of global phases Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. 6-38 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x