HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 151

Chapter 3 B Commands boot Send documentation comments to [email protected] When the boot auto-copy command is issued, the system copies the boot variable images which are local (present) in the active supervisor module (but not in the standby supervisor module) to the standby supervisor module. For kickstart and system boot variables, only those images that are set for the standby supervisor module are copied. For modules (line card) images, all modules present in standby's corresponding locations (bootflash: or slot0:) will be copied. Examples The following example adds the new system image file to the SYSTEM environment variable. switch(config)# boot system bootflash:system.img The following example boots from the CompactFlash device (slot0:). The switch updates the SYSTEM environment variable to reflect the new image file in the specified Flash device. switch(config)# boot system slot0:system.img The following example overwrites the old Kickstart environment variable in the configuration file: switch(config)# boot kickstart bootflash:kickstart.img The following example specifies the SSM image to be used: switch(config)# boot asm-sfn bootflash:m9000-ek9-asm-sfn-mz.1.2.2.bin The following example enables automatic copying of boot variables from the active supervisor module to the standby supervisor module. switch(config)# boot auto-copy The following example disables the automatic copy feature (default). switch(config)# no boot auto-copy Related Commands Command show boot Description Displays the configured boot variable information. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 3-5