HP Cisco MDS 9124 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 721
show fctimer
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 721 highlights
Chapter 9 Fibre Channel Show Commands show fctimer Send comments to [email protected] show fctimer To view the Fibre Channel timers (fctimer), use the show fctimer command. show fctimer [d_s_tov [vsan vsan-id] | e_d_tov [vsan vsan-id] | f_s_tov [vsan vsan-id] | r_a_tov [vsan vsan-id] | last action status | pending | pending-diff | session status | status | vsan vsan-id] Syntax Description vsan vsan-id d_s_tov e_d_tov f_s_tov r_a_tov last action status pending pending-diff session status status (Optional) Displays information for a VSAN. The range is 1 to 4093. (Optional) Displays the distributed services time out value (D_S_TOV) in milliseconds. (Optional) Displays the error detection time out value (E_D_TOV) in milliseconds. (Optional) Displays the fabric stability time out value (F_S_TOV) in milliseconds. (Optional) Displays the resource allocation time out value (R_A_TOV) in milliseconds. (Optional) Displays the status of the last CFS commit or discard operation. (Optional) Displays the status of pending fctimer commands. (Optional) Displays the difference between pending database and running config. (Optional) Displays the state of fctimer CFS session. (Optional) Displays the Fibre Channel timer status. Command Default None Command Modes EXEC mode. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples The following example displays configured global TOVs: switch# show fctimer The following example displays configured TOVs for a specified VSAN: switch# show fctimer vsan 10 Related Commands Command fctimer Description Configures fctimer parameters. OL-16599-01 Cisco Nexus 5000 Series Command Reference 9-27