HP Cisco MDS 9124 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 83

Chapter 1 Basic System Commands parity Send comments to [email protected] parity To configure the parity for the console port, use the parity command. To revert to the default, use the no form of this command. parity {even | none | odd} no parity {even | none | odd} Syntax Description even none odd Specifies even parity. Specifies no parity. Specifies odd parity. Command Default The none keyword is the default. Command Modes Terminal line configuration Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You can configure the console port only from a session on the console port. Examples This example shows how to configure the parity for the console port: switch# configure terminal switch(config)# line console switch(config-console)# parity even This example shows how to revert to the default parity for the console port: switch# configure terminal switch(config)# line console switch(config-console)# no parity even Related Commands Command show line Description Displays information about the console port configuration. OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-61