HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 176

cimserver Chapter 4 C Commands Send documentation comments to [email protected] cimserver Use the cimserver command to configure the Common Information Models (CIM) parameters. Use the no form of this command to revert to factory defaults. cimserver {certificate {bootflash:filename | slot0:filename | volatile:filename} | clearcertificate filename | enable | enablehttp | enablehttps} no cimserver {certificate {bootflash:filename | slot0:filename | volatile:filename} | clearcertificate filename enable enablehttp enablehttps} Syntax Description certificate bootflash: slot0: volatile: filename clearcertificate enable enablehttp enablehttps Installs the Secure Socket Layer (SSL) certificate Specifies the location for internal bootflash memory. Specifies the location for the CompactFlash memory or PCMCIA card. Specifies the location for the volatile file system. The name of the license file with a .pem extension. Clears a previously-installed SSL certificate. Enables and starts the CIM server. Enables the HTTP (non-secure) protocol for the CIM server-(default). Enables the HTTPS (secure) protocol for the CIM server. Defaults None. Command Modes Configuration mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines A CIM client is required to access the CIM server. The client can be any client that supports CIM. 4-22 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x