HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 187

Chapter 4 C Commands clear counters (EXEC mode) Send documentation comments to [email protected] clear counters (EXEC mode) To clear the interface counters, use the clear counters command in EXEC mode. clear counters {all | interface {fc | mgmt | port-channel | sup-fc | vsan} number} Syntax Description all interface type number Clears all interface counters. Clears interface counters for the specified interface. Specifies the interface type. See the Keywords table in the "Usage Guidelines" section. Specifies the number of the slot or interface being cleared. Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines The following table lists the keywords and number ranges for the clear counters interface types: Keyword fc gigabitethernet mgmt port-channel sup-fc vsan Interface Type Fibre Channel Gigabit Ethernet Management PortChannel Inband VSAN Number 1- 2 or 1 - 9 (slot) 1- 2 or 1 - 9 (slot) 0-0 (management interface) 1-128 (PortChannel) 0-0 (Inband interface) 1- 4093 (VSAN ID) This command clears counter displayed in the show interface command output. Examples The following example shows how to clear counters for a VSAN interface. switch# clear counters interface vsan 13 Related Commands Command show interface Description Displays interface information. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 4-33