HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 480

debug xbc Chapter 6 Debug Commands Send documentation comments to [email protected] debug xbc To enable crossbar client debugging (XBC), use the debug xbc command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug xbc {demux | deque | init | main} no debug xbc {demux | deque | init | main} Syntax Description demux deque init main Enables debugging for crossbar demux functions. Enables debugging for crossbar deque events. Enables debugging for crossbar initialization. Enables debugging for crossbar main functions. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines Use this command to debug crossbar client events and information. Examples The following example displays the system output when the debug xbc init command is issued: switch# debug xbc init Related Commands Command no debug all Description Disables all debugging. 6-134 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x