HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 446

debug rlir Chapter 6 Debug Commands Send documentation comments to [email protected] debug rlir To enable Registered Link Incident Report (RLIR) debugging, use the debug rlir command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug rlir {all | errors | events | mts-errors | mts-events} no debug rlir {all | errors | events | mts-errors | mts-events} Syntax Description all errors events mts-errors mts-events Enables debugging for all RLIR features. Enables debugging for RLIR error conditions. Enables debugging for the RLIR events. Enables debugging for MTS error conditions. Enables debugging for MTS events. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug rlir all command is issued: switch# debug rlir all Related Commands Command no debug all show rlir Description Disables all debugging. Displays information about RLIR, Link Incident Record Registration (LIRR), and Distribute Registered Link Incident Record (DRLIR) frames. 6-100 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x