HP Cisco MDS 9216A Cisco MDS 9500 Series Hardware Installation Guide (OL-17467 - Page 170
Step 2, MDS 9000 Family, CLI Configuration Guide
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Migration Procedures for the MDS 9513 Director Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Send documentation comments to [email protected]. Step 2 Step 3 Step 4 Verify that the MDS 9513 Director is running Cisco SAN-OS 3.x by entering the show version command at the command line. This example shows the output of the show version command: switch# show version Cisco Storage Area Networking Operating System (SAN-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software may be covered under the GNU Public License or the GNU Lesser General Public License. A copy of each such license is available at http://www.gnu.org/licenses/gpl.html and http://www.gnu.org/licenses/lgpl.html Software BIOS: version 1.1.0 loader: version 1.2(2) kickstart: version 3.0(3) [gdb] system: version 3.0(3) [gdb] BIOS compile time: 10/24/03 kickstart image file is: bootflash:///boot-3.0.3 kickstart compile time: 9/15/2006 10:00:00 [10/02/2006 06:26:25] system image file is: bootflash:///isan-3.0.3 system compile time: 9/15/2006 10:00:00 [10/02/2006 06:45:25] Upgrade to Cisco NX-OS 4.1(1b). Refer to the upgrade procedure described in the MDS 9000 Family CLI Configuration Guide. Verify that the switch is running Cisco NX-OS 4.1(1b) by entering the show version command. This example shows the output of the show version command: switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. Software BIOS: version 1.0.7 loader: version N/A kickstart: version 4.1(1b) system: version 4.1(1b) BIOS compile time: 08/26/08 kickstart image file is: bootflash:/bootimage kickstart compile time: 10/12/2020 25:00:00 [09/06/2008 01:36:07] system image file is: bootflash:/isanimage system compile time: 8/22/2008 0:00:00 [09/06/2008 02:48:50] Hardware cisco MDS 9513 (13 Slot) Chassis ("Supervisor/Fabric-2") Motorola, 7447A, altivec with 1032472 kB of memory. Processor Board ID JAE1217FOFI Device name: sw5-qa01 bootflash: 1023120 kB slot0: 511664 kB (expansion flash) Kernel uptime is 1 day(s), 9 hour(s), 12 minute(s), 4 second(s) Last reset at 518531 usecs after Sun Sep 7 01:29:37 2008 Reason: Reset triggered due to Switchover Request by User Cisco MDS 9500 Series Hardware Installation Guide A-4 OL-17467-02