HP Cisco MDS 9216i Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 163

Chapter 5 Fabric Manager Client Fabric Manager Client Quick Tour Send documentation comments to [email protected] Step 3 Step 4 Use the arrows to move additional switches or end ports from the Available column to the Selected column. Click OK to save the group. To add a switch or end port to an existing group in Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Right-click a switch or end device and select Group > Add To > YourGroupName. You see the Edit User Defined Group dialog box (see Figure 5-9). Use the arrows to move additional switches or end ports from the Available column to the Selected column. Click OK to save the updated group. To filter the display by a group you have created, follow these steps: Step 1 Expand the Groups folder in the Logical Domains pane. You see the list of groups that you have created as shown in Figure 5-10. Figure 5-10 Group Highlighted in Fabric Pane Map Step 2 Step 3 Click the name of the group that you want to filter. In the Fabric pane, the switches or end devices in your group are shown normally; all other switches and end devices are shown in gray. Click the Groups folder in the Logical Domains pane to return the display to normal. Note User defined groups tables are filtered based on switches in the group except for switches where CFS-controlled features are enabled when all CFS member switches are displayed to avoid misconfigurations. OL-8007-10, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 5-17