HP Cisco MDS 9216i Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 233

Chapter 8 Performance Manager Flow Statistics Configuration Send documentation comments to [email protected] Note If you are managing your fabrics with Performance Manager, you need to set up an initial set of flows and collections on the fabric. See the "Historical Performance Monitoring" section on page 60-4 for a full description on Performance Manager features. Note When creating flows, make sure the device type is set correctly. You see the dialog box shown in Figure 8-3. Figure 8-3 Define Traffic Flows Dialog Box Step 3 Step 4 Step 5 Step 6 Step 7 Choose the VSAN from which to create flows. Flows are defined per active zone set. Choose the Type radio button for the flow type you want to define. Optionally, check the Clear old flows on modified switches check box if you want to remove old flow data. Optionally, check the Create flows on all cards check box if you want to create flows on all cards for flexibility. Click Next to review the available flows for the chosen VSAN. You see the dialog box shown in Figure 8-4. OL-8007-10, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 8-5