HP Cisco MDS 9216i Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 735

Chapter 39 Configuring Users and Common Roles Role-Based Authorization Send documentation comments to [email protected] You see the Roles - Create dialog box in Figure 39-2. Figure 39-2 Create Roles Dialog Box Step 3 Step 4 Step 5 Step 6 Step 7 Select the switches on which to configure a role. Enter the name of the role in the Name field. Enter the description of the role in the Description field. Optionally, check the Enable check box to enable the VSAN scope and enter the list of VSANs in the Scope field to which you want to restrict this role. Click Create to create the role, or click Close to close the Roles - Create dialog box without creating the common role. Note Device Manager automatically creates six roles that are required for Device Manager to display a view of a switch. These roles are: system, snmp, module, interface, hardware, and environment. Deleting Common Roles To delete a common role using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Click the Roles tab in the Information pane. Click the role you want to delete. Click Delete Row to delete the common role. Click Yes to confirm the deletion or No to cancel it. About the VSAN Policy Configuring the VSAN policy requires the ENTERPRISE_PKG license (see Chapter 10, "Obtaining and Installing Licenses"). OL-8007-10, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 39-3