HP Cisco MDS 9216i Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 298

CFS Example Using Fabric Manager Chapter 13 Using the CFS Infrastructure Send documentation comments to [email protected] Figure 13-9 shows a confirmation dialog box. Figure 13-9 Deleting CFS Regions Step 3 Click Yes to confirm deletion of the region. CFS Example Using Fabric Manager This procedure is an example of what you see when you use Fabric Manager to configure a feature that uses CFS. Step 1 Step 2 Select the CFS-capable feature you want to configure. For example, expand a VSAN, and then select Port Security in the Logical Domains pane. You see the port security configuration for that VSAN in the Information pane. Click the CFS tab. You see the CFS configuration and status for each switch (see Figure 13-10). Figure 13-10 CFS Configuration Step 3 Step 4 Select enable for each switch from the Feature Admin drop-down list. Repeat step 3 for all switches in the fabric. Note A warning displays if you do not enable CFS for all switches in the fabric for this feature. Step 5 Step 6 Step 7 Check the Master check box for the switch to act as the merge master for this feature. Select commit Changes from the Config Action drop-down list for each switch that you enabled for CFS. Click the Servers tab in the Information pane. 13-16 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x