HP Cisco MDS 9222i Cisco MDS 9500 Series Hardware Installation Guide (OL-17467 - Page 164

Removing and Installing Clock Modules Chapter 2 Installing the Cisco MDS 9500 Series Send documentation comments to [email protected]. These tools are required to remove and install a clock module: • Number 1 Phillips screwdriver • Your own ESD-prevention equipment or the disposable grounding wrist strap included with the clock module replacement kit The clock module is located behind the top power supply in the rear of the Cisco MDS 9506 Director. Figure 2-45 shows the rear view of the Cisco MDS 9506 Director with both power supplies removed. Figure 2-45 Clock Module Location on the Cisco MDS 9506 Director (Rear View) 1 120093 Cisco MDS 9506 1 Clock module Caution Always wear an ESD wrist strap when handling modules or coming into contact with internal components. 2-84 Cisco MDS 9500 Series Hardware Installation Guide OL-17467-02