HP Cisco MDS 9222i Cisco MDS 9500 Series Hardware Installation Guide (OL-17467 - Page 222

V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 27.5 A.

Page 222 highlights

Power Specifications for the Cisco MDS 9509 Director Appendix D Technical Specifications Send documentation comments to [email protected]. Table D-11 Specifications for Cisco MDS 9509 Power Supplies (continued) Description Current rating Frequency Output capacity Output voltage at 110/120 Output voltage at 200/240 2500-W DC Power Supply Voltage Current rating Terminal block Output capacity Output voltage 3000-W AC Power Supply Type Voltage Current rating Frequency Output capacity Output voltage at 110/120 Output voltage at 200/240 4000-W AC Power Supply Type Voltage Current rating Frequency Output capacity Output voltage at 200/240 Specification 16 A maximum at 100 to 120 VAC and 1300-W output. 16 A maximum at 200 to 240 VAC and 2500-W output. Note For current ratings of plugs, see Figure E-5 on page E-9. 50 to 60 Hz (nominal) (±3 Hz for full range). 1325 W maximum (100 to 120 VAC). 2525 W maximum (200 to 240 VAC). 3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 27.5 A. 3.3 V at 1 5 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A. -48 VDC to -60 VDC continuous. 70 A at -48 VDC; 55 A at -60 VDC; 80 A at -40.5 VDC. Accommodates 2 to 14 AWG copper conductors. Use 90°C copper conductors for North American installations. Note Actual size of the wire required is determined by the installer or local electrician. Terminal block material is rated at 302°F (150°C). 2525 W maximum (-48 to -60 VDC). 3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A. Autoranging input with power factor corrector. 100 to 240 VAC (±10%). 17.6 A maximum at 100 to 120 VAC and 1400-W output. 17.6 A maximum at 200 to 240 VAC and 3000-W output. For current ratings of plugs, see Figure E-5 on page E-9 50 to 60 Hz (nominal) (±3 Hz for full range). 1400 W maximum (100 to 120 VAC). 3000 W maximum (200 to 240 VAC). 3.3 V at 15 A; 12 V at 12 A; 42 V at 27.9 A. 3.3 V at 1 5 A; 12 V at 12 A; 42 V at 66 A. High-line input with power factor corrector, 220 VAC, single-phase circuit. 200 to 240 VAC (±10%). 23 A Note For current ratings of plugs, see Figure E-8 on page E-11. 50/60 Hz (nominal) (±3% for full range). 4000 W maximum. 3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 91.2 A D-10 Cisco MDS 9500 Series Hardware Installation Guide OL-17467-02

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288

Send documentation comments to [email protected].
D-10
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix D
Technical Specifications
Power Specifications for the Cisco MDS 9509 Director
Current rating
16 A maximum at 100 to 120 VAC and 1300-W output.
16 A maximum at 200 to 240 VAC and 2500-W output.
Note
For current ratings of plugs, see
Figure E-5 on page E-9
.
Frequency
50 to 60 Hz (nominal) (±3 Hz for full range).
Output capacity
1325 W maximum (100 to 120 VAC).
2525 W maximum (200 to 240 VAC).
Output voltage at 110/120
3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 27.5 A.
Output voltage at 200/240
3.3 V at 1 5 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A.
2500-W DC Power Supply
Voltage
-48 VDC to -60 VDC continuous.
Current rating
70 A at -48 VDC; 55 A at -60 VDC; 80 A at -40.5 VDC.
Terminal block
Accommodates 2 to 14 AWG copper conductors. Use 90°C
copper conductors for North American installations.
Note
Actual size of the wire required is determined by the
installer or local electrician. Terminal block material is
rated at 302°F (150°C).
Output capacity
2525 W maximum (-48 to -60 VDC).
Output voltage
3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A.
3000-W AC Power Supply
Type
Autoranging input with power factor corrector.
Voltage
100 to 240 VAC (±10%).
Current rating
17.6 A maximum at 100 to 120 VAC and 1400-W output.
17.6 A maximum at 200 to 240 VAC and 3000-W output.
For current ratings of plugs, see
Figure E-5 on page E-9
Frequency
50 to 60 Hz (nominal) (±3 Hz for full range).
Output capacity
1400 W maximum (100 to 120 VAC).
3000 W maximum (200 to 240 VAC).
Output voltage at 110/120
3.3 V at 15 A; 12 V at 12 A; 42 V at 27.9 A.
Output voltage at 200/240
3.3 V at 1 5 A; 12 V at 12 A; 42 V at 66 A.
4000-W AC Power Supply
Type
High-line input with power factor corrector, 220 VAC,
single-phase circuit.
Voltage
200 to 240 VAC (±10%).
Current rating
23 A
Note
For current ratings of plugs, see
Figure E-8 on page E-11
.
Frequency
50/60 Hz (nominal) (±3% for full range).
Output capacity
4000 W maximum.
Output voltage at 200/240
3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 91.2 A
Table D-11
Specifications for Cisco MDS 9509 Power Supplies (continued)
Description
Specification