HP DL360 hp ProLiant DL360 generation 3 server high-density deployment - Page 18

HP ProLiant DL360 G3 Server High-Density Deployment Preliminary Power Configurations Examples Suggested Configurations The high/low voltage and dual-power supply capabilities of the ProLiant DL360 G3 server makes it adaptable to a variety of power configurations. Each of the following examples suggests a method of power distribution for a group of servers mounted in a rack. These examples illustrate server power configurations only as well as ways to accomplish server management using iLO and KVM switching products and do not take into account such accessories as KVM switches and display monitors that are typically included in an installation. Table 6 is a Quick Reference table with suggested rack configurations for deploying ProLiant DL360 G3 servers. Examples of these configurations are further explained later in this section in Configurations A, B, and C. Table 6. Suggested Rack Configurations Quick Reference Configuration A B C Priority Maximum Performance Maximum Flexibility with Traditionalist Density Redundant Power Rack Size 42U 42U 42U Server Count 42 35 24 Power Source High Voltage High Voltage Low Voltage PDU KVM Switching Local Console 4 x 40 Amp Modular PDU No local KVM Switching (iLO only) No Local Console 4 x 40 Amp PDU IP Console Switch TFT5600RKM 4 x 24 Amp PDU IP Console Switch TFT5600 RKM Lights-Out Management iLO Advanced iLO Advanced iLO Standard or iLO Advanced IP Connections 1 x 48 Port 10/100 Ethernet Switch (44+4)* for iLO 2 x 24 Port 10/100 Ethernet Switch (22+2)** for iLO 2 x 24 Port 10/100 Ethernet Hub for iLO 6 x 16 Port Gigabit 1 x 48 Port Gigabit 2 x 48 Port Ethernet Switch for data Ethernet Switch (44+4)* Gigabit Ethernet for data Switch (44+4)* for data * 44 10/100 ports plus 4 Gigabit uplink ports ** 22 10/100 ports plus 2 Gigabit uplink ports 18