HP DL360 hp ProLiant DL360 generation 3 server high-density deployment - Page 5
ProLiant DL360, G3 Server Power, Requirements - proliant g3 standard watts
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
HP ProLiant DL360 G3 Server High-Density Deployment Preliminary ProLiant DL360 G3 Server Power Requirements In the standard single-processor configuration, the ProLiant DL360 G3 server includes one 325-watt power supply that can operate off high or low voltage AC power. Single power supply units can be upgraded to a dual-power supply configuration with a redundant power supply option kit. The power supplies are hot-pluggable, allowing live removal and replacement. The ProLiant DL360 G3 server uses an IEC C14-type AC plug that requires a power cable with an IEC C13 receptacle at one end. Power cord kits that are compatible with the physical and electrical requirements of the DL360 G3 server are available from HP and listed later in this document. The ProLiant DL360 G3 server power specifications are provided in the following table using values derived from the product specification as well as the Power Calculator utility with a server in nominal and maximum configurations. Table 2. ProLiant DL360 G3 Server Power Specifications Input Voltage Power Supply Rated Output (W) Nom. Input Wattage (W) Max. Input Wattage (W) Nom. Input Current Draw (A) 100 325 234 338 2.4 115 325 232 336 2.1 208 325 227 329 1.1 220 325 224 326 1.0 230 325 222 324 1.0 240 325 220 321 0.9 Max. Input Current Draw (A) 3.5 3.0 1.6 1.5 1.4 1.4 Nom. Input (Va) 238 237 231 228 227 225 Max. Input (Va) Max. Thermal (Btu/Hr) Efficiency (%) Power Factor 345 1154 72.1 0.98 343 1146 72.6 0.98 336 1123 74.1 0.98 332 1111 74.9 0.98 330 1104 75.4 0.98 328 1095 76.0 0.98 Nom. Leakage Current (Ma) Max. Leakage Current (Ma) 0.31 0.63 0.36 0.72 0.65 1.30 0.69 1.38 0.72 1.44 0.75 1.50 Nom Inrush Current (A) @ 2 30 30 30 30 30 30 Ms Max Inrush Current (A) @ 2 Ms 60 60 60 60 60 60 NOTES: Nom. = Nominal rating of a unit operating w/ one processor, 1HDD, up to 2 DIMMs, and no PCI cards. Max. = Maximum rating of a fully loaded unit: 2 processors, 2HDD, 4 DIMMs, 1 PCI cards, and 2 power supplies. These values are derived from a combination of product specifications and the Power Calculator configured as above in "Nom" and "Max." 5