HP DL760 HP ProLiant DL760 Generation 2 Server Upgrade Poster
HP DL760 - ProLiant - G2 Manual
 |
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP DL760 manual content summary:
- HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 1
are qualified to install and service computer equipment and are trained to recognize hazards in products with high energy levels, such as the power supplies in this computer system. For detailed instructions, refer to the HP ProLiant DL760 Generation 2 Server User Guide included on the Documentation - HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 2
Array 5i • ProLiant DL760 G2 processor and memory module with four Intel Xeon processors MP and 10 PC133 DIMMs. • ProLiant DL760 G2 system midplane • ProLiant DL760 G2 I/O lid with label • Two ProLiant DL760 G2 service number labels • Two 220V power cables 2 Preparing the Server Before beginning - HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 3
chassis (2). The processor and memory module will not be reused. To remove the server midplane, disengage the power supplies and the media module. To remove the power supplies: 1. Squeeze not be reused, but any I/O expansion boards must be transferred to the new I/O module. Continued on next page - HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 4
the I/O Lid With the processor and memory module removed from the chassis, remove the I/O lid. Grasp the sides of the I/O lid and slide it forward until it is free of the server chassis and set aside. The I/O lid will not be reused. To install the ProLiant DL760 G2 system midplane: 1. Angle the - HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 5
which the Remote Management cable (30-pin) connects. Refer to the HP ProLiant DL760 Generation 2 Server User Guide for details on installing the RILOE II option. 5. Add any additional option expansion boards, as desired. HP has designed a self-latching slot-keeper feature to accommodate full-length - HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 6
with the processor board option. 6. Install any additional memory into the five memory cartridges located at the front of the ProLiant DL760 G2 processor and memory module. Refer to the memory requirements and installation procedures in the HP ProLiant DL760 Generation 2 Server User Guide located on - HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 7
, attach the cable management arm to the server. 3. Reinstall all I/O cables and power cables. Verify the power supply (AC) LED is solid green. IMPORTANT: ProLiant DL760 G2 server configurations require 220V power. Install the 220V power cables that came with your server, if not already in use (two - HP DL760 | HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 8
Array 5i Controller User Guide • ROM-Based Setup Utility User Guide • Servers Troubleshooting Guide • PCI Hot Plug Administration Guide • Remote Insight Lights-Out Edition II User Guide For the HP ProLiant DL760 G2 Power Calculator, refer to the ActiveAnswers website at activeanswers.compaq.com
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and
identification, this product has been assigned a unique series
number. The series number can be found on the product
nameplate label, along with all required approval markings
and information. When requesting compliance information for
this product, always refer to this series number. The series
number should not be confused with the marketing name or
model number of the product.
Regulatory Notice Rating Label
The rating label on the device shows which class (A or B) the
equipment falls into. Class B devices have an FCC logo or
FCC ID on the label. Class A devices do not have an FCC ID
or logo on the label. After the class of the device is
determined, refer to the corresponding statement on the
Documentation CD.
Audience Assumptions
This poster provides a quick way for customers experienced in
server installation to upgrade the ProLiant 8500 or ProLiant
DL760 server to a ProLiant DL760 Generation 2 server. These
instructions are written assuming you are qualified to install
and service computer equipment and are trained to recognize
hazards in products with high energy levels, such as the
power supplies in this computer system. For detailed
instructions, refer to the
HP ProLiant DL760 Generation 2
Server User Guide
included on the Documentation CD.
hp
ProLiant DL760
generation 2 server
upgrade poster
Important Safety Information
Before installing the product, read the
Important Safety
Information
guide included with the server.
WARNING:
This product contains energy levels that are
considered hazardous. There is a risk of personal injury
from electric shock and hazardous energy. The installation
and servicing of this product must be performed by
individuals who are knowledgeable of the procedures,
precautions, and hazards associated with equipment
containing hazardous energy circuits.
WARNING:
To reduce the risk of personal injury or
damage to the equipment:
•
Observe local occupational health and safety
requirements and guidelines for manual
material handling.
•
Obtain adequate assistance to lift and stabilize
the chassis during installation or removal. The
product will be unstable when not fastened to
the rails.
•
Remove all hot-plug power supplies, removable
modules, and drives to reduce the overall weight
of the product.
WARNING:
To reduce the risk of personal injury from hot
surfaces, allow the internal components to cool before
touching them.
63 - 73 kg
140 - 161 lb