HP DL760 HP ProLiant DL760 Generation 2 Server Upgrade Poster - Page 1

hp ProLiant DL760 generation 2 server upgrade poster Regulatory Compliance Notices Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this series number. The series number should not be confused with the marketing name or model number of the product. Regulatory Notice Rating Label The rating label on the device shows which class (A or B) the equipment falls into. Class B devices have an FCC logo or FCC ID on the label. Class A devices do not have an FCC ID or logo on the label. After the class of the device is determined, refer to the corresponding statement on the Documentation CD. Audience Assumptions This poster provides a quick way for customers experienced in server installation to upgrade the ProLiant 8500 or ProLiant DL760 server to a ProLiant DL760 Generation 2 server. These instructions are written assuming you are qualified to install and service computer equipment and are trained to recognize hazards in products with high energy levels, such as the power supplies in this computer system. For detailed instructions, refer to the HP ProLiant DL760 Generation 2 Server User Guide included on the Documentation CD. Important Safety Information Before installing the product, read the Important Safety Information guide included with the server. WARNING: This product contains energy levels that are considered hazardous. There is a risk of personal injury from electric shock and hazardous energy. The installation and servicing of this product must be performed by individuals who are knowledgeable of the procedures, precautions, and hazards associated with equipment containing hazardous energy circuits. WARNING: To reduce the risk of personal injury or damage to the equipment: 63 - 73 kg • Observe local occupational health and safety requirements and guidelines for manual 140 - 161 lb material handling. • Obtain adequate assistance to lift and stabilize the chassis during installation or removal. The product will be unstable when not fastened to the rails. • Remove all hot-plug power supplies, removable modules, and drives to reduce the overall weight of the product. WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal components to cool before touching them.