HP Dc7100 Computer Setup (F10) Utility Guide - Page 23

Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Advanced* (continued) *For advanced users only. Power-On Options (continued) Allows you to set: • Option ROM prompt (enable/disable) Enabling this feature will cause the system to display a message before loading options ROMs. (This feature is supported on select models only.) • Remote wakeup boot source (remote server/local hard drive). • After Power Loss (off/on): After power loss, if you connect the computer to an electric power strip and would like to turn on power to the computer using the switch on the power strip, set this option to "on." ✎ If you turn off power to the computer using the switch on a power strip, you will not be able to use the suspend/sleep feature or the Remote Management features. • POST Delay (in seconds) (enable/disable). Enabling this feature will add a user-specified delay to the POST process. This delay is sometimes needed for hard disks on some PCI cards that spin up very slowly; so slowly that they are not ready to boot by the time POST is finished. The POST delay also gives you more time to select the F10 key to enter Computer (F10) Setup. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. Computer Setup (F10) Utility Guide www.hp.com 19