HP Dc7100 Computer Setup (F10) Utility Guide - Page 6

Computer Setup (F10) Utility ■ Enable the power-on password prompt during system restarts (warm boots) as well as during power-on. ■ Establish a setup password that controls access to Computer Setup (F10) Utility and the settings described in this section. ■ To secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded NIC, so that they cannot be used until they are unsecured. ■ Enable or disable Master Boot Record (MBR) Security. ■ Enable or disable removable media boot ability. ■ Enable or disable legacy diskette write ability (when supported by hardware). ■ Solve system configuration errors detected but not automatically fixed during the Power-On Self-Test (POST). ■ Replicate the system setup by saving system configuration information on diskette and restoring it on one or more computers. ■ Execute self-tests on a specified ATA hard drive (when supported by drive). ■ Enable or disable DriveLock security (when supported by MultiBay drive). 2 www.hp.com Computer Setup (F10) Utility Guide