HP Dv7-2170us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 57
Memory module, of the module opposite the slot rises away from the computer.
UPC - 884962256558
View all HP Dv7-2170us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Removal and replacement procedures Memory module Description 4096-MB SDRAM (DDR2, 800-MHz, PC2-6400, 1-DIMM) 2048-MB (DDR2, 800-MHz, PC2-6400, 1-DIMM) 1024-MB (DDR2, 800-MHz, PC2-6400, 1-DIMM) Spare part number 582087-001 582086-001 582085-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the primary hard drive cover (see "Primary hard drive cover" on page 4-9). Remove the memory module: ✎ This computer has both primary and expansion memory module slots. The top memory module slot is for expansion memory and the bottom slot is for primary memory. The following procedure can be used to remove memory modules from either slot. 1. Spread the retaining tabs 1 on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 2. Remove the module 2 by pulling it away from the slot at an angle. ✎ Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. 4-14 Maintenance and Service Guide