HP Dv7-2170us HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide - Page 95
and graphics/heat sink contact, graphics subsystem chip
UPC - 884962256558
View all HP Dv7-2170us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Removal and replacement procedures 4. Remove the fan/heat sink assembly 3 by lifting it straight up. ✎ The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board each time the fan/heat sink assembly is removed. Thermal paste is used on the processor 1 and the heat sink section 2 that services it. Thermal pads are used on the Northbridge chip 3 and Northbridge contact 4, the graphics subsystem chip 5 and graphics/heat sink contact 6. Replacement thermal material is included with all fan/heat sink assembly, system board, and processor spare part kits. ✎ Steps 5 through 8 apply only to computer models equipped with UMA graphics subsystem memory. 4-52 Maintenance and Service Guide
4–52
Maintenance and Service Guide
Removal and replacement procedures
4. Remove the fan/heat sink assembly
3
by lifting it straight up.
✎
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
board each time the fan/heat sink assembly is removed. Thermal paste is used on the processor
1
and the heat
sink section
2
that services it. Thermal pads are used on the Northbridge chip
3
and Northbridge contact
4
, the
graphics subsystem chip
5
and graphics/heat sink contact
6
. Replacement thermal material is included with all
fan/heat sink assembly, system board, and processor spare part kits.
✎
Steps 5 through 8 apply only to computer models equipped with UMA graphics subsystem memory.