HP Dx2250 HP Compaq dx2250 Business PC, Service Reference Guide, 1st Edition - Page 115
Control panel message, Description, Recommended action, Network Server Mode Active and No
UPC - 883585243983
View all HP Dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Table C-1 Numeric Codes and Text Messages (continued) Control panel message Description Recommended action cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 2202-PMM Deallocation Error during MEBx cleanup Memory error during POST execution of the 1. Management Engine (ME) BIOS Extensions option ROM 2. Reboot the computer. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 2203-Setup error during MEBx execution MEBx selection or exit resulted in a setup failure. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 2204-Inventory error during MEBx execution BIOS information passed to the MEBx resulted in a failure. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version. 3. If the error still persists, replace the system board. 2205-Interface error during MEBx execution MEBx operation experienced a hardware error during communication with ME. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version. 3. If the error still persists, replace the system board. Invalid Electronic Serial Number Electronic serial number has become corrupted. 1. Run Computer Setup. If Setup already has data in the field or will not allow the serial number to be entered, download from http://www.hp.com and run SP5572.EXE (SNZERO.EXE). 2. Run Computer Setup and try to enter serial number under Security, System ID, then save changes. Network Server Mode Active and No Keyboard Attached Keyboard failure while Network Server Mode 1. Reconnect keyboard with computer enabled. turned off. 2. Check connector for bent or missing pins. ENWW POST Numeric Codes and Text Messages 109