HP Dx2250 HP Compaq dx2250 Business PC, Service Reference Guide, 1st Edition - Page 94
Power Supply
UPC - 883585243983
View all HP Dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Power Supply WARNING! Voltage is always present on the system board when the computer is plugged into an active AC outlet. To avoid possible personal injury and damage to the equipment the power cord should be disconnected from the computer and/or the AC outlet before opening the computer. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 59) 2. Remove the access panel (Access Panel on page 60). 3. Disconnect all power cables from the mass storage devices and from the system board. 4. Remove the 4 screws that secure the power supply to the chassis. 5. Slide the power supply toward the front of the computer, then lift it out of the computer. To install the power supply, reverse the removal procedure. 88 Chapter 7 Removal and Replacement Procedures- Microtower (MT) Chassis ENWW