HP Dx2250 HP Compaq dx2250 Business PC, Service Reference Guide, 1st Edition - Page 84
Speaker
UPC - 883585243983
View all HP Dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Speaker 1. Prepare the computer for disassembly (Preparation for Disassembly on page 59) 2. Remove the access panel (Access Panel on page 60) 3. Remove the front bezel (Front Bezel on page 61) 4. Disconnect the speaker cable from the system board. 5. Free the cable from the cable tie that is attached to the chassis. 6. Remove the screw that secures the speaker to the inside of the chassis (1) then, remove the speaker (2) by sliding it out of the retaining clips.. To install the speaker, reverse the removal procedure. When installing the speaker, make sure the speaker wires point towards the speaker retaining screw. 78 Chapter 7 Removal and Replacement Procedures- Microtower (MT) Chassis ENWW
Speaker
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
59
)
2.
Remove the access panel (
Access Panel
on page
60
)
3.
Remove the front bezel (
Front Bezel
on page
61
)
4.
Disconnect the speaker cable from the system board.
5.
Free the cable from the cable tie that is attached to the chassis.
6.
Remove the screw that secures the speaker to the inside of the chassis (1) then, remove the
speaker (2) by sliding it out of the retaining clips..
To install the speaker, reverse the removal procedure.
When installing the speaker, make sure the speaker wires point towards the speaker retaining screw.
78
Chapter 7
Removal and Replacement Procedures— Microtower (MT) Chassis
ENWW