HP ENVY 17-1100 HP ENVY 17 - Maintenance and Service Guide - Page 49
Primary hard drive, and then unplugging the AC adapter from the computer.
View all HP ENVY 17-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Primary hard drive NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector cable. Description Spare part number 640-GB, 7200-rpm 621046-001 500-GB, 7200-rpm 603784-001 320-GB, 7200-rpm 603783-001 1-TB, 5400-rpm 603788-001 750-GB, 5400-rpm 603787-001 640-GB, 5400-rpm 603785-001 300-GB solid-state drive 631146-001 160-GB solid-state drive 603781-001 Hard Drive Hardware Kit (includes primary hard drive bracket and cable and secondary hard drive 603772-001 bracket and cable) Before removing the primary hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the memory module compartment cover (see Memory module on page 43). 6. Remove the hard drive cover (see Primary hard drive on page 39). Component replacement procedures 39