HP ENVY 17-1100 HP ENVY 17 - Maintenance and Service Guide - Page 80
Subwoofer, System board see
View all HP ENVY 17-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Subwoofer Description Subwoofer (includes cable) Spare part number 603800-001 Before removing the subwoofer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38), and then remove the following components: a. Hard drive cover (see Primary hard drive on page 39) b. memory module compartment cover (see Memory module on page 43). c. Keyboard (see Keyboard on page 51) d. Top cover (see Top cover on page 53) e. System board (see System board on page 61) Remove the subwoofer: 1. Release the wireless antenna cables from the clips built into the subwoofer (1) and the base enclosure (2). 2. Remove the three Phillips PM2.5×5.0 broad head screws (3) that secure the subwoofer to the base enclosure. 70 Chapter 4 Removal and replacement procedures