HP ENVY 17-1100 HP ENVY 17 - Maintenance and Service Guide - Page 66
Power button board, Turn the top cover upside down, with the front toward you.
View all HP ENVY 17-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Power button board Description Power button board (includes cable) Spare part number 603794-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38), and then remove the following components: a. memory module compartment cover (see Memory module on page 43) b. Keyboard (see Keyboard on page 51) c. Top cover (see Top cover on page 53) Remove the power button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the power button board to the top cover. 3. Remove the power button board (2). Reverse this procedure to install the power button board. 56 Chapter 4 Removal and replacement procedures