HP ENVY x2 HP Envy x2 Maintenance and Service Guide IMPORTANT! This document i - Page 45
System board, Power connector/USB/Audio board cable - models
View all HP ENVY x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
System board NOTE: The system board spare part kit includes replacement thermal material. Description Spare part number For use only with computer models equipped with 64-GB devices 702366-001 For use only with W8 Standard computer models equipped with 64-GB devices 702366-501 For use only with W8 Pro computer models equipped with 64-GB devices 702366-601 System board for keyboard dock 702367-001 System board for use only with 64-GB models equipped with an Intel Z2760 1.8GHz processor (includes processor and replacement thermal material) 702366-001 System board for use only with 64-GB W8 Standard models equipped with an Intel Z2760 1.8GHz 702366-501 processor (includes processor and replacement thermal material) System board for use only with 64-GB W8 Pro models equipped with an Intel Z2760 1.8GHz processor (includes processor and replacement thermal material) 702366-601 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 28). 5. Remove the battery (see Battery on page 29). Remove the system board: 1. Remove the following cables: ● Power connector/USB/Audio board cable (1) ● Digital card media reader cable (2) ● Hinge assembly left cable(3) ● TouchPad cable (4) ● Keyboard cable (5) ● Multimedia board cable (6) Component replacement procedures 37