HP ENVY x2 HP Envy x2 Maintenance and Service Guide IMPORTANT! This document i - Page 59
Webcam assembly (front), Disconnect all external devices connected to the computer.
View all HP ENVY x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5. Remove the ten screws securing the display bezel. 6. Release the bezel's bottom edge (1), release the left and right edges (2), release the top edge (3), and remove the display bezel (4). Reverse this procedure to install the display bezel. Webcam assembly (front) Description Webcam assembly Spare part numbers 702358-001 Before removing the webcam assembly: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel assembly and Battery on page 40). Component replacement procedures 51