HP EliteBook 650 Maintenance and Service Guide - Page 71
Speakers, and then pull the system board away from the connectors
View all HP EliteBook 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
2. Remove the port bracket (1) by removing the three Phillips M2.0 × 4.0 screws (2) that secure the bracket to the system board and then removing the bracket (3). 3. Remove the four Phillips M2.0 × 2.5 screws (4) that secure the system board to the computer. 4. Lift the side of the system board upward (5), and then pull the system board away from the connectors on the side of the computer to remove it (6). 5. When installing a new system board, be sure to remove the thermal pad from the bottom of the old board and install it onto the bottom of the new board. Reverse this procedure to install the system board. Speakers To remove the speakers, use this procedure and illustration. Table 6-11 Speakers description and part number Description Speakers Spare part number M21723-001 Speakers 63