HP EliteBook Folio 1020 EliteBook Folio 1020 G1 Notebook PC Maintenance and Se - Page 67
ForcePad (Touchpad), Remove the ForcePad
View all HP EliteBook Folio 1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
ForcePad (Touchpad) Description ForcePad (Touchpad) (includes cable) Spare part number 790066-001 Before removing the ForcePad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 32). 5. Remove the battery (see Battery on page 56). Remove the ForcePad: 1. Disconnect the ForcePad cable (1) from the system board. 2. Disconnect the NFC module antenna cable (2) from the ForcePad. 3. Remove the four Phillips PM2.0×2.0 broadhead screws (3) that secure the ForcePad to the computer, and then lift the ForcePad from the computer (4). Reverse the removal procedures to install the ForcePad. Component replacement procedures 59