HP Integrity Superdome 2 8/16 HP Superdome 2 Partitioning Administrator Guide - Page 58
Poweron Partition, From The Cli
View all HP Integrity Superdome 2 8/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Figure 6-13 Graceful and Force Poweroff (vPar) • Navigate to the status tab to see the run state of the partition. NOTE: When an nPartition is active in vPars mode, the power operations require the OVERRIDE option to change the mode. POWERON PARTITION From the CLI • Command: POWERON PARTITION {{} [:vPar ID>] | ALL} [FORCE] [OVERRIDE] } • Description: If an nPartition is specified, this command powers on the blades and IO interconnects in the nPartition and boots the nPartition to EFI. If the nPartition is in vPars mode and has vPars defined, then all the defined vPars in the nPartition are booted to EFI. If an individual vPar is specified, it is booted to EFI. If the nPartition is in nPars mode and a vPar is specified to be powered on, the OVERRIDE argument changes the mode of the nPartition to vPars, powers on the nPartition and boots the specified vPar. If the nPartition is in vPars mode and has no vPars defined, the nPartition is powered on to reach an active state. Once the nPartition is active, new vPars can be created and individually powered on to reach EFI. 58 Booting and Resetting Partitions (nPartitions and vPars)