HP LaserJet 9000 HP LaserJet 9000mfp and 9000Lmfp - User Guide - Page 129

7 Problem solving 129 Message UNABLE TO STORE JOB UNSUPPORTED SIZE IN TRAY xx USE [TYPE] [SIZE] FROM TRAY N INSTEAD? WAIT FOR PRINTER TO REINITIALIZE xx.y PRINTER ERROR To continue touch Continue 13.xy.zz JAM IN [LOCATION] 20 INSUFFICIENT MEMORY To continue touch Continue Explanation or recommended action A job cannot be stored on the product because of a memory, disk, or configuration problem. If job name is unknown, insert UNTITLED. A sent job has a specified size that is not supported by the product. If the requested paper size or type is not available, the product asks if it should use a different paper size or type. Select a size or type from a different tray. The RAM disk setting has been changed before the product is automatically rebooted. This change will not take effect until the product reinitializes. If you change the mode of the external device, turn the product off, turn the product on, and wait for the product to reinitialize. A product error which can be cleared by touching Continue on the pop-up dialog box has occurred. Remove jammed paper from the specified location (see "Clearing jams" on page 95). Open and close the front door to clear the message. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider (see the introduce guide on the product CD, or go to www.hp.com/support/lj9000). The product received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. Touch Continue to print the transferred data (some data might be lost), then simplify the print job or install additional memory (see "Product memory and expansion" on page 218). Understanding product messages