HP LaserJet Pro 100 HP LaserJet Pro 100 Color MFP M175 - Quick Reference Guide - Page 9

Check the scanner glass for dirt and smudges, product; these can damage the product.

Get HP LaserJet Pro 100 PDF manuals and user guides View all HP LaserJet Pro 100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Check the scanner glass for dirt and smudges Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing. 1. Use the power switch to turn off the product, and then unplug the power cord from the electrical socket. 2. Open the scanner lid. 3. Clean the scanner glass, the document feeder scanning strip, and the white plastic backing with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner. CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass or platen. They might seep and damage the product. 4. Dry the glass and white plastic with a chamois or a cellulose sponge to prevent spotting. 5. Plug in the product, and then use the power switch to turn on the product. ENWW Check the scanner glass for dirt and smudges 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can
affect performance. Use the following procedure to clean the scanner glass and white plastic backing.
1.
Use the power switch to turn off the
product, and then unplug the power cord
from the electrical socket.
2.
Open the scanner lid.
3.
Clean the scanner glass, the document
feeder scanning strip, and the white plastic
backing with a soft cloth or sponge that has
been moistened with nonabrasive glass
cleaner.
CAUTION:
Do not use abrasives,
acetone, benzene, ammonia, ethyl alcohol,
or carbon tetrachloride on any part of the
product; these can damage the product.
Do not place liquids directly on the glass or
platen. They might seep and damage the
product.
4.
Dry the glass and white plastic with a
chamois or a cellulose sponge to prevent
spotting.
5.
Plug in the product, and then use the
power switch to turn on the product.
ENWW
Check the scanner glass for dirt and smudges
9