HP LaserJet Pro M118-M119 User Guide 1 - Page 69

Manually con IPv4 TCP/IP parameters, System, Device Information, Device Description, Apply

Page 69 highlights

i. Press and hold the Resume button until the Ready light begins blinking. ii. Release the Resume button. b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If the web browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. 2. Open the System tab. 3. On the Device Information page, the default printer name is in the Device Description field. You can change this name to uniquely identify this printer. NOTE: Completing the other fields on this page is optional. 4. Click the Apply button to save the changes. Manually configure IPv4 TCP/IP parameters Use the EWS to manually set an IPv4 address, subnet mask, and default gateway. 1. Open the HP Embedded Web Server (EWS): a. Print a configuration page to determine the IP address or host name. i. Press and hold the Resume button until the Ready light begins blinking. ii. Release the Resume button. b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If the web browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. 2. On the Networking tab, click the IPv4 Config Method in the left navigation pane. 3. From the IP Preferred Address Method drop-down, select Manual, and then edit the IPv4 configuration settings. 4. Click the Apply button. ENWW Configure IP network settings 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122

i.
Press and hold the Resume
button until the Ready
light begins blinking.
ii.
Release the Resume
button.
b.
Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer configuration page. Press the
Enter
key on the computer keyboard. The EWS opens.
NOTE:
If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the computer.
2.
Open the
System
tab.
3.
On the
Device Information
page, the default printer name is in the
Device Description
field. You can change
this name to uniquely identify this printer.
NOTE:
Completing the other fields on this page is optional.
4.
Click the
Apply
button to save the changes.
Manually configure IPv4 TCP/IP parameters
Use the EWS to manually set an IPv4 address, subnet mask, and default gateway.
1.
Open the HP Embedded Web Server (EWS):
a.
Print a configuration page to determine the IP address or host name.
i.
Press and hold the Resume
button until the Ready
light begins blinking.
ii.
Release the Resume
button.
b.
Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer configuration page. Press the
Enter
key on the computer keyboard. The EWS opens.
NOTE:
If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the computer.
2.
On the
Networking
tab, click the
IPv4 Config Method
in the left navigation pane.
3.
From the
IP Preferred Address Method
drop-down, select
Manual
, and then edit the IPv4 configuration
settings.
4.
Click the
Apply
button.
ENWW
Configure IP network settings
59