HP LaserJet Pro M118-M119 User Guide 1 - Page 83

Control-panel light patterns continued, Table 6-2

Page 83 highlights

Table 6-2 Control-panel light patterns (continued) Light status State of the printer Action The toner cartridge is incompatible with the printer, possibly due to a missing or damaged memory chip. Replace the toner cartridge. The imaging drum is incompatible with the Replace the imaging drum. printer, possibly due to a missing or damaged memory chip. Multiple supplies are incompatible with the Replace the supplies. printer, possibly due to a missing or damaged memory chip. The toner cartridge has been protected on Replace the toner cartridge. another printer. The imaging drum has been protected on Replace the imaging drum. another printer. Multiple supplies have been protected on Replace the supplies. another printer. An unauthorized toner cartridge is installed. Replace the toner cartridge. An unauthorized imaging drum is installed. Replace the imaging drum. Unauthorized supplies are installed. Replace the supplies. The cartridge sensor has experienced an error. Replace the toner cartridge. An MICR toner cartridge must be installed. Install an MICR toner cartridge. The Attention and Ready The printer has experienced a fatal error lights are on. from which it cannot recover. 1. Turn off the printer or disconnect the power cord from the printer. 2. Wait 30 seconds, and then turn on the printer or reconnect the power cord to the printer. 3. Wait for the printer to initialize. If the error persists, contact HP customer support. ENWW Interpret control-panel light patterns 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122

Table 6-2
Control-panel light patterns (continued)
Light status
State of the printer
Action
The toner cartridge is incompatible with
the printer, possibly due to a missing or
damaged memory chip.
Replace the toner cartridge.
The imaging drum is incompatible with the
printer, possibly due to a missing or
damaged memory chip.
Replace the imaging drum.
Multiple supplies are incompatible with the
printer, possibly due to a missing or
damaged memory chip.
Replace the supplies.
The toner cartridge has been protected on
another printer.
Replace the toner cartridge.
The imaging drum has been protected on
another printer.
Replace the imaging drum.
Multiple supplies have been protected on
another printer.
Replace the supplies.
An unauthorized toner cartridge is
installed.
Replace the toner cartridge.
An unauthorized imaging drum is installed.
Replace the imaging drum.
Unauthorized supplies are installed.
Replace the supplies.
The cartridge sensor has experienced an
error.
Replace the toner cartridge.
An MICR toner cartridge must be installed.
Install an MICR toner cartridge.
The Attention and Ready
lights are on.
The printer has experienced a fatal error
from which it cannot recover.
1.
Turn off the printer or disconnect the power cord from the
printer.
2.
Wait 30 seconds, and then turn on the printer or reconnect
the power cord to the printer.
3.
Wait for the printer to initialize.
If the error persists, contact HP customer support.
ENWW
Interpret control-panel light patterns
73