HP LaserJet Pro M118-M119 User Guide 1 - Page 70

Link speed and duplex settings, Networking, Advanced, Other Settings, Automatic, 10T Full, 10T Half

Get HP LaserJet Pro M118-M119 PDF manuals and user guides View all HP LaserJet Pro M118-M119 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Link speed and duplex settings NOTE: This information applies only to Ethernet networks. It does not apply to wireless networks. The link speed and communication mode of the print server must match the network hub. For most situations, leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the printer from communicating with other network devices. To make changes, use the printer control panel. NOTE: The printer setting must match the setting for the network device (a network hub, switch, gateway, router, or computer). NOTE: Making changes to these settings causes the printer to turn off and then on. Make changes only when the printer is idle. 1. Open the HP Embedded Web Server (EWS): a. Print a configuration page to determine the IP address or host name. i. Press and hold the Resume button until the Ready light begins blinking. ii. Release the Resume button. b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If the web browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. 2. On the Networking tab, click the Advanced link in the left navigation pane. 3. In the Other Settings area, select one of the following options: ● Automatic: The print server automatically configures itself for the highest link speed and communication mode allowed on the network. ● 10T Full: 10 megabytes per second (Mbps), full-duplex operation ● 10T Half: 10 Mbps, half-duplex operation ● 100TX Full: 100 Mbps, full-duplex operation ● 100TX Half: 100 Mbps, half-duplex operation 4. Click the Apply button. The printer turns off and then on. 60 Chapter 5 Manage the printer ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Link speed and duplex settings
NOTE:
This information applies only to Ethernet networks. It does not apply to wireless networks.
The link speed and communication mode of the print server must match the network hub. For most situations,
leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the
printer from communicating with other network devices. To make changes, use the printer control panel.
NOTE:
The printer setting must match the setting for the network device (a network hub, switch, gateway,
router, or computer).
NOTE:
Making changes to these settings causes the printer to turn off and then on. Make changes only when
the printer is idle.
1.
Open the HP Embedded Web Server (EWS):
a.
Print a configuration page to determine the IP address or host name.
i.
Press and hold the Resume
button until the Ready
light begins blinking.
ii.
Release the Resume
button.
b.
Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer configuration page. Press the
Enter
key on the computer keyboard. The EWS opens.
NOTE:
If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the computer.
2.
On the
Networking
tab, click the
Advanced
link in the left navigation pane.
3.
In the
Other Settings
area, select one of the following options:
●
Automatic
: The print server automatically configures itself for the highest link speed and
communication mode allowed on the network.
●
10T Full
: 10 megabytes per second (Mbps), full-duplex operation
●
10T Half
: 10 Mbps, half-duplex operation
●
100TX Full
: 100 Mbps, full-duplex operation
●
100TX Half
: 100 Mbps, half-duplex operation
4.
Click the
Apply
button. The printer turns off and then on.
60
Chapter 5
Manage the printer
ENWW