HP Mini 110-3500 HP Mini 110, Compaq Mini CQ10 and HP Mini 1103 - Maintenance - Page 46
Service access cover, of the service access cover until the tabs on the opposite side of the cover
View all HP Mini 110-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Service access cover Description Service access cover, black (for use in all countries and regions except Brazil) Service access cover, black (for use only in Brazil) Spare part number 633484-001 633485-001 Before removing the service access cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). Remove the service access cover: 1. Slide the service access cover release lever (1) to the right. 2. Lift up the edge (2) of the service access cover until the tabs on the opposite side of the cover are clear of the slots in the base enclosure. 3. Remove the cover (3). Install the service access cover: 1. Align the tabs (1) on the service access cover with the slots in the base enclosure. 38 Chapter 4 Removal and replacement procedures