HP Mini 110-3500 HP Mini 110, Compaq Mini CQ10 and HP Mini 1103 - Maintenance - Page 62

from the system board., Open the computer as far as possible.

Get HP Mini 110-3500 - PC PDF manuals and user guides View all HP Mini 110-3500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

3. Remove the interior hinge covers (2). 4. Turn the computer upside down, with the front toward you. 5. Remove the rear rubber feet, and then remove the 2 Phillips 2.5×5.0 screws (1) under the feet. 6. Remove the 4 Phillips 2.0×5.0 screws (2) that secure the top cover to the base enclosure. 7. Turn the computer right-side up, with the front toward you. 8. Open the computer as far as possible. 9. Disconnect the speaker cable (1) from the system board. 10. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the TouchPad cable (3) from the system board. 54 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
3.
Remove the interior hinge covers
(2)
.
4.
Turn the computer upside down, with the front toward you.
5.
Remove the rear rubber feet, and then remove the 2 Phillips 2.5×5.0 screws
(1)
under the feet.
6.
Remove the 4 Phillips 2.0×5.0 screws
(2)
that secure the top cover to the base enclosure.
7.
Turn the computer right-side up, with the front toward you.
8.
Open the computer as far as possible.
9.
Disconnect the speaker cable
(1)
from the system board.
10.
Release the ZIF connector
(2)
to which the TouchPad cable is connected, and then disconnect
the TouchPad cable
(3)
from the system board.
54
Chapter 4
Removal and replacement procedures