HP Mini 110-3500 HP Mini 110, Compaq Mini CQ10 and HP Mini 1103 - Maintenance - Page 56
RTC battery, and then unplugging the AC adapter from the computer.
View all HP Mini 110-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2. Grasp the edge of the memory module (2), and then pull it out of the memory module slot. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install the memory module. RTC battery Description RTC battery Spare part number 622351-001 Before removing the real-time clock (RTC) battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 35). b. Service access cover (see Service access cover on page 38). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 48 Chapter 4 Removal and replacement procedures